BX-S026 Twin-Head LED Emergency Light with 3-Hour Backup

BX-S026 Twin-Head LED Emergency Light for Commercial Projects

The BX-S026 twin-head LED emergency light combines two circular multi-lens lamp heads with a compact white cabinet. Green front graphics and an integrated top handle distinguish this model within the emergency-lighting range. The supplier catalogue lists 2 × 5W rated power, an 85–265V input range, a 3.7V/3000mAh battery and three hours of emergency operation. These specifications give distributors, electrical contractors and project buyers a clear model reference for enquiries, sample evaluation and commercial purchasing schedules.

Four Key Product Features

1. Two 5W LED lamp heads. BX-S026 has two round heads with multiple individual lenses, visually different from the single-reflector designs elsewhere in the range. Its listed power is 2 × 5W. Use available photometric information to evaluate the proposed layout: wattage alone does not establish beam coverage, mounting spacing or the light level delivered to the floor.
2. Three-hour rated emergency operation. The catalogue lists three hours of backup lighting. This provides a useful comparison point when reviewing emergency-duration requirements. Confirm the supplied battery configuration, preparation procedure and rating conditions before approving the product for a project or including its runtime in a purchasing specification.
3. 3000mAh battery specification. The model entry identifies a 3.7V/3000mAh battery. This is a higher listed capacity than the 1800mAh specification of BX-S024 and BX-S025, but capacity alone should not be used to predict runtime across different products. Request the complete battery details, charging instructions and replacement requirements for the unit being supplied.
4. Compact, identifiable enclosure. Listed dimensions are 270 × 65 × 265 mm. A rounded white cabinet, integrated handle and green graphic panels create a recognizable appearance for sample checks and stock identification. Confirm the dimensional drawing, mounting details and service clearance before finalizing installation positions or ordering accessories.

Technical Specifications

Figures follow the supplier catalogue. Confirm the final configuration, accessories and order-specific technical documentation before purchase.

Commercial Corridor Application

Consider BX-S026 when reviewing backup illumination for commercial corridors, circulation areas and other indoor locations identified in the project design. Wall-mounted placement can keep the unit clear of the walking route, subject to suitable fixings and the manufacturer’s installation instructions. The project designer should determine mounting height and spacing from the actual building layout and available lighting data.

This model provides illumination, not an illuminated EXIT message. Where directional identification is required, select suitable signs separately and coordinate them within the overall emergency-lighting plan. The catalogue does not establish an ingress-protection rating for BX-S026, so outdoor, washdown or damp-location suitability should not be assumed from the product photograph.

Specification Checks Before Ordering

Include BX-S026, your quantity and the destination country when requesting a quotation. Add the intended electrical supply conditions and any documentation required by your customer. The listed input range is 85–265V; frequency, connection details and supplied accessories should be confirmed with the order-specific information rather than inferred from the voltage range.

For repeat procurement, retain the approved sample details alongside the quotation. Check the lamp appearance, cabinet graphics, dimensions and battery specification so subsequent orders can be compared consistently. If a project requires a particular approval or test report, request model-specific evidence for review. General catalogue symbols are not a substitute for documents identifying the product being purchased.

Frequently Asked Buyer Questions

Does the catalogue specify battery chemistry? The entry gives 3.7V/3000mAh without naming the chemistry. Ask for the complete battery specification and replacement guidance when preparing maintenance requirements or purchasing documentation.

Can this replace another twin-head model directly? Do not assume interchangeability. Compare the physical dimensions, installation arrangement, electrical specifications and required lighting performance before selecting BX-S026 as an alternative.

What should be included in project handover? Request the operating instructions, charging guidance and recommended test procedure. Installation, commissioning and ongoing testing should be handled by appropriately qualified personnel using the supplied documentation and applicable project requirements.

How can buyers compare samples consistently? Use the same checklist for each candidate: model identification, enclosure dimensions, control layout, supplied battery details and the documents provided. Record the sample configuration before making a decision. This helps distinguish genuine differences between models from differences in photography, packaging or the level of information included in a quotation.

Request BX-S026 Pricing

Send your quantity, destination, sample needs and technical requirements to request a BX-S026 quotation. Include the relevant lighting schedule where available so the proposed supply can be reviewed against your needs. Confirm the final specification, current availability and delivery arrangements before approving bulk procurement.