BX-S022/S023 Twin-Head Emergency Lights with 3-Hour Backup

BX-S022/S023 Twin-Head Emergency Lights for Commercial Supply

The BX-S022/S023 twin-head emergency light range brings together two cabinet configurations listed under one specification block in the supplier catalogue. Both are shown with a white rectangular body, two circular reflector heads and a small top handle. The shared catalogue entry lists 3W rated power, an 85–265V input range, a 3.7V/1500mAh battery and three hours of emergency operation. This page helps distributors, electrical contractors and commercial buyers compare the range and request the correct version for their order.

Four Key Product Features

1. Two circular lamp heads. Each pictured configuration combines two separate reflector heads with a compact battery cabinet. This familiar twin-head format is suitable for evaluation in commercial backup-lighting schedules. The catalogue does not state beam angle or light output, so coverage and installation spacing should be established from additional technical information rather than the photograph alone.
2. Three-hour rated backup. The supplier lists an emergency operating time of three hours. Buyers can use this figure when comparing products against their project requirements, while confirming the supplied battery configuration and the conditions under which runtime is specified. A sample evaluation can help establish whether the selected unit meets the intended purchasing specification.
3. 85–265V input specification. The shared entry gives an input voltage range of 85–265V and a rated power of 3W. Include the destination supply requirements in your enquiry so the order-specific electrical details can be checked. Frequency, wiring arrangements and supplied connection accessories should be confirmed before installation planning is completed.
4. Two visible cabinet configurations. The catalogue photograph shows different front-panel layouts within the BX-S022/S023 family. Both have white cabinets and twin round heads, but their controls and labels are not identical. Specify the required model and confirm its appearance against an approved sample or supplier photograph before ordering.

Technical Specifications

The catalogue groups BX-S022 and BX-S023 under one set of specifications. Confirm the dimensions, control functions and supplied configuration for your selected model before purchase.

Commercial Application Planning

Consider this range when reviewing emergency illumination for indoor commercial circulation areas, shared building spaces or other locations identified in the project lighting design. It provides lighting rather than an illuminated EXIT message, so any required directional signs should be specified separately. Choosing the number and position of units requires a review of the room layout, mounting conditions and target illumination levels.

Before approving an installation, request the operating instructions and the available mounting details. The catalogue does not identify an ingress-protection rating for this range; outdoor, damp or washdown suitability must not be assumed. Keep electrical connections, testing and commissioning within the scope of appropriately qualified personnel, and check that the selected configuration matches the requirements of the actual site.

Ordering the Correct BX-S022 or BX-S023 Version

Because the catalogue presents two visible configurations together, a clear purchase description is important. Send the model reference together with the preferred product photograph and required quantity. Ask for confirmation of the front-panel arrangement, control functions and accessories included with the shipment. Do not rely on the position of a product within the catalogue photograph to identify its model, as the individual images are not separately labelled.

For distributors planning repeat orders, retain the approved sample details with the quotation. This provides a consistent reference for the cabinet appearance, battery specification and packaging. If model-specific approvals or test reports are required for your market, identify those requirements at the enquiry stage and request supporting documentation. No certification is claimed here solely on the basis of symbols elsewhere in the catalogue.

Buyer Questions

Are these supplied as a two-unit set? The photograph shows the two configurations in the range, not a confirmed package quantity. Specify the quantity required for each model in your enquiry.

Is the battery chemistry specified? The shared catalogue entry gives 3.7V/1500mAh but does not name the chemistry. Request the exact battery specification and replacement guidance for the selected unit.

What is needed for a quotation? Provide the model, quantity, destination country, required documentation and expected delivery schedule. Include any project-specific electrical or installation requirements so the proposed supply can be checked before an order is placed.

Request Pricing and Model Details

Contact us with your BX-S022/S023 requirements to request pricing, availability and configuration details. We can use your enquiry to clarify the version you need and the information required for your purchasing review. Confirm the final specification and sample arrangement before approving bulk supply.